Comfortable - the ceramic cartridge with GROHE
SilkMove® technology guarantees the smoothest handling
within an extra generous operating angle of the lever that creates
effortless precision and ensures a lifetime of maintenance-free
Practical – the diverter is used to switch between the hand shower
and the bath filler.
To avoid surprises, the diverter automatically switches to the bath
filler when the water is turned off.
Safe – Temperature Adjustment: An optional Temperature limiter
prevents scalding especially around children.
By varying the installation height of the hand shower holder, you
influence how far the shower hoses reaches into the bathtub.
To prevent drinking water from being sucked back into the pipe
network (see EN 1717), an approved safety device must be fitted
when installing a hand shower in combination with a bathtub. Such a
device is available in the GROHE accessories range – product number
29 007 000.
To ensure good functioning of this bath solution, a minimum of 7 l
of hot/cold water are required per minute at a dynamic supply
pressure of at least 1 bar ahead of the fitting. For faster filling
of the bathtub, a higher flow rate is recommended.
General tips for installation
Please make sure that the water volume and the water pressure is
adequate so as the waste is sufficiently be dimensioned.